Index _ | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Z _ __init__() (GeoPackage method) (Output method) (Solver method) (Surface2D method) (SWMMOutputException method) (SWMMSolverException method) A a1 (GroundwaterParams attribute) a2 (GroundwaterParams attribute) a3 (GroundwaterParams attribute) add() (Gages method) (Inlets method) (Landuses method) (LIDs method) (Links method) (Nodes method) (Patterns method) (Pollutants method) (Streets method) (Subcatchments method) (TimeSeries method) (Transects method) add_callback() (Solver method) add_curve() (Tables method) add_dwf() (Inflows method) add_external() (Inflows method) add_gage() (ModelBuilder method) add_hydrograph() (Inflows method) add_hydrograph_gage() (Inflows method) add_link() (ModelBuilder method) add_node() (ModelBuilder method) add_progress_callback() (Solver method) add_rdii() (Inflows method) add_rdii_decay() (Inflows method) add_seconds() (in module openswmm.engine._datetime) add_station() (Transects method) add_subcatch() (ModelBuilder method) add_subcatchment() (ModelBuilder method) add_timeseries() (Tables method) add_title_line() (ModelBuilder method) add_triangle_coupling() (Surface2D method) AFTER_CLOSE (CallbackType attribute) AFTER_END (CallbackType attribute) AFTER_OPEN (CallbackType attribute) AFTER_REPORT (CallbackType attribute) AFTER_START (CallbackType attribute) AFTER_STEP (CallbackType attribute) AIR_TEMP (SystemAttribute attribute) allow_ponding (LegacySystem property) ALLOW_PONDING (SWMMSystemProperties attribute) analyze_aquifer_impact() (ModelEditor method) analyze_gage_impact() (ModelEditor method) analyze_hydrograph_impact() (ModelEditor method) analyze_inlet_impact() (ModelEditor method) analyze_landuse_impact() (ModelEditor method) analyze_lid_impact() (ModelEditor method) analyze_link_impact() (ModelEditor method) analyze_node_impact() (ModelEditor method) analyze_pattern_impact() (ModelEditor method) analyze_pollutant_impact() (ModelEditor method) analyze_snowpack_impact() (ModelEditor method) analyze_street_impact() (ModelEditor method) analyze_subcatch_impact() (ModelEditor method) analyze_table_impact() (ModelEditor method) analyze_transect_impact() (ModelEditor method) API_EVAP (SWMMSystemProperties attribute) API_PET (SWMMSubcatchmentProperties attribute) API_RAINFALL (SWMMSubcatchmentProperties attribute) API_SNOWFALL (SWMMSubcatchmentProperties attribute) API_TEMPERATURE (SWMMSystemProperties attribute) API_WIND_SPEED (SWMMSystemProperties attribute) append() (Controls method) (EventsView method) (SaveSchedule method) apply() (HotStart method) aquifer (Subcatchment attribute) AQUIFER (SWMMObjects attribute) Aquifers (class in openswmm.engine._subcatchments) aquifers (Solver property) area (LegacySubcatchment property) (RDIIEntry attribute) (Subcatchment attribute) AREA (SWMMSubcatchmentProperties attribute) area() (XSectionGeometry method) area_from_section_factor() (XSectionGeometry method) as_curve() (Tables method) as_timeseries() (Tables method) as_tuple() (XSection method) average_loss (LegacyLink property) AVERAGE_LOSS (SWMMLinkProperties attribute) B b1 (GroundwaterParams attribute) b2 (GroundwaterParams attribute) BadHandleError BadIndexError BadParamError barrels (Link attribute) BEFORE_CLOSE (CallbackType attribute) BEFORE_END (CallbackType attribute) BEFORE_INITIALIZE (CallbackType attribute) BEFORE_OPEN (CallbackType attribute) BEFORE_REPORT (CallbackType attribute) BEFORE_START (CallbackType attribute) BEFORE_STEP (CallbackType attribute) begin() (GeoPackage method) BOTTOM_ELEV (SWMMAquiferProperties attribute) boundary_edge_count (Surface2D property) BUILDUP_COEFF1 (SWMMLandUseProperties attribute) BUILDUP_COEFF2 (SWMMLandUseProperties attribute) BUILDUP_COEFF3 (SWMMLandUseProperties attribute) BUILDUP_FUNC (SWMMLandUseProperties attribute) BUILDUP_NORMALIZER (SWMMLandUseProperties attribute) C CallbackType (class in openswmm.legacy.engine) capacities (Links attribute) capacity (LegacyLink property) (Link attribute) CAPACITY (LinkAttribute attribute) (SWMMLinkProperties attribute) cascaded (ImpactEntry attribute) CFS (FlowUnits attribute) (SWMMFlowUnits attribute) clear() (Controls method) (EventsView method) (ExternalForcingLog method) (Forcing method) (SaveSchedule method) clear_all() (Forcing method) clear_api_evap_rate() (LegacySystem method) clear_api_pet() (LegacySubcatchment method) clear_api_temperature() (LegacySystem method) clear_api_wind_speed() (LegacySystem method) clear_hydrograph_group_months() (Inflows method) clear_stations() (Transects method) clear_title() (ModelBuilder method) clear_treatment() (Quality method) (Solver method) clear_triangle_couplings() (Surface2D method) clear_userflag_value() (ModelBuilder method) clear_value() (UserFlags method) cleared_fields (ConversionResult attribute) climate (Solver property) climate_dry_only() (Forcing method) climate_evap() (Forcing method) climate_evap_rate() (Forcing method) climate_temperature() (Forcing method) climate_wind() (Forcing method) close() (GeoPackage method) (HotStart method) (OutputReader method) (Solver method), [1] close_runoff_interface() (Solver method) closed (Link attribute) CLOSED (SolverState attribute) CMS (FlowUnits attribute) (SWMMFlowUnits attribute) CO_FRACTION (SWMMPollutantProperties attribute) co_pollutant (Pollutant attribute) CO_POLLUTANT (SWMMPollutantProperties attribute) code (EngineError attribute) code_enum (EngineError attribute) commit() (GeoPackage method) ConcentrationUnits (class in openswmm.legacy.output) CONDUCT_SLOPE (SWMMAquiferProperties attribute) CONDUCTIVITY (SWMMAquiferProperties attribute) CONDUIT (SWMMLinkTypes attribute) continuity_error (Surface2D property) CONTROL_RULE (SWMMObjects attribute) control_setting (Link attribute) control_settings (Links attribute) ControlRule (class in openswmm.engine._controls) Controls (class in openswmm.engine._controls) controls (Solver property) ConversionResult (class in openswmm.engine._edit) convert_link() (ModelEditor method) convert_node() (ModelEditor method) COUNT (ConcentrationUnits attribute) (SWMMPatternProperties attribute) COURANT_FACTOR (SWMMSystemProperties attribute) coverage (Subcatchment attribute) CoverageView (class in openswmm.engine._subcatchments) create() (Solver method) create_observed_series() (GeoPackage method) CREATED (SolverState attribute) crest_height (WeirView attribute) critical_depth() (XSectionGeometry method) CrossSection (class in openswmm.engine._geometry) crown_elev (Node attribute) crs (HotStart property) (SimulationOptions property) (Solver property) (Spatial property) CRSError culvert_code (Link attribute) curb_length (LegacySubcatchment property) CURB_LENGTH (SWMMSubcatchmentProperties attribute) CURRENT_DATE (SWMMSystemProperties attribute) current_datetime (Solver property), [1] Curve (class in openswmm.engine._tables) curve (PumpView attribute) (StorageView attribute) CURVE (SWMMObjects attribute) curve_number (InfiltrationView attribute) curve_number_drying_time (InfiltrationView attribute) D data_source (Gage attribute) datetime_to_oadate() (in module openswmm.engine._dates) decode_date() (in module openswmm.engine._datetime) decode_swmm_datetime() (in module openswmm.legacy.engine) decode_time() (in module openswmm.engine._datetime) define() (UserFlags method) define_userflag() (ModelBuilder method) definitions() (UserFlags method) degree (Node attribute) delete_aquifer() (ModelEditor method) delete_gage() (ModelEditor method) delete_hydrograph() (ModelEditor method) delete_inlet() (ModelEditor method) delete_landuse() (ModelEditor method) delete_lid() (ModelEditor method) delete_link() (ModelEditor method) delete_node() (ModelEditor method) delete_pattern() (ModelEditor method) delete_pollutant() (ModelEditor method) delete_snowpack() (ModelEditor method) delete_street() (ModelEditor method) delete_subcatch() (ModelEditor method) delete_table() (ModelEditor method) delete_transect() (ModelEditor method) DependencyError depth (LegacyLink property) (LegacyNode property) (Link attribute) (Node attribute) DEPTH (SWMMLinkProperties attribute) (SWMMNodeProperties attribute) depth_from_area() (XSectionGeometry method) depth_from_volume() (Node method) depths (Links attribute) (Nodes attribute) description (UserFlagDef attribute) destroy() (Solver method) dinit (HydrographEntry attribute) DIRECT_INFLOW (SystemAttribute attribute) discharge_coeff (WeirView attribute) divider (Node attribute) DIVIDER (SWMMNodeTypes attribute) DividerView (class in openswmm.engine._nodes) dmax (HydrographEntry attribute) drecov (HydrographEntry attribute) dry_depth (Surface2D property) DRY_WEATHER_INFLOW (SystemAttribute attribute) ds_imperv (Subcatchment attribute) ds_perv (Subcatchment attribute) dsda() (XSectionGeometry method) dwf_conc (Pollutant attribute) DWF_CONCENTRATION (SWMMPollutantProperties attribute) dwf_count (Inflows attribute) E editor (Solver property) elapsed (Solver property) ELAPSED_TIME (SWMMSystemProperties attribute) ElementType (class in openswmm.legacy.output) encode_date() (in module openswmm.engine._datetime) encode_swmm_datetime() (in module openswmm.legacy.engine) encode_time() (in module openswmm.engine._datetime) end (Event attribute) end() (Solver method), [1] end_contractions (WeirView attribute) END_DATE (SWMMSystemProperties attribute) end_datetime (ModelBuilder attribute) (ModelEditor attribute) (SimulationOptions property) (Solver property), [1] END_NODE (SWMMLinkProperties attribute) end_node_offset (LegacyLink property) END_NODE_OFFSET (SWMMLinkProperties attribute) ENDED (SolverState attribute) EngineError error_code (OutputReader attribute) ERROR_CODE (SWMMSystemProperties attribute) evap (Subcatchment attribute) EVAP_DRY_ONLY (SWMMSystemProperties attribute) EVAP_INFIL_LOSS (SystemAttribute attribute) EVAP_RATE (SWMMSystemProperties attribute) evaporation (LegacySubcatchment property) EVAPORATION (SWMMSubcatchmentProperties attribute) EVAPORATION_LOSS (SubcatchAttribute attribute) EVAPORATION_RATE (SystemAttribute attribute) evaps (Subcatchments attribute) Event (class in openswmm.engine._solver) event_count (Solver property) events (Solver property) EventsView (class in openswmm.engine._solver) execute() (Solver method) exfil_params (StorageView attribute) expon (OutletView attribute) ext (SimulationOptions attribute) external_count (Inflows attribute) EXTERNAL_POLLUTANT_BUILDUP (SWMMSubcatchmentProperties attribute) ExternalForcingLog (class in openswmm.legacy.engine) F FACTOR (SWMMPatternProperties attribute) factors (Pattern attribute) field (ImpactEntry attribute) FIELD_CAPACITY (SWMMAquiferProperties attribute) FileError files_get() (ModelBuilder method) files_set() (ModelBuilder method) finalize() (ModelBuilder method) (Solver method) find_references() (Controls method) FINISHED (SolverState attribute) flap_gate (Link attribute) (OutfallView attribute) FLOOD_LOSSES (SystemAttribute attribute) flooding (LegacyNode property) FLOODING (SWMMNodeProperties attribute) FLOODING_LOSSES (NodeAttribute attribute) flow (LegacyLink property) (Link attribute) FLOW (SWMMLinkProperties attribute) FLOW_DEPTH (LinkAttribute attribute) flow_error (LegacySystem property) FLOW_ERROR (SWMMSystemProperties attribute) flow_limit (LegacyLink property) FLOW_LIMIT (SWMMLinkProperties attribute) FLOW_RATE (LinkAttribute attribute) flow_units (LegacySystem property) (Output property) (OutputReader attribute) (Solver property) FLOW_UNITS (SWMMSystemProperties attribute) flow_units (XSectionGeometry property) FLOW_VELOCITY (LinkAttribute attribute) FLOW_VOLUME (LinkAttribute attribute) flows (Links attribute) FlowUnits (class in openswmm.legacy.output) force_clear_all() (Surface2D method) force_coupling_flux() (Surface2D method) force_evap() (Surface2D method) force_evap_uniform() (Surface2D method) force_rainfall() (Surface2D method) force_rainfall_uniform() (Surface2D method) Forcing (class in openswmm.engine._forcing) forcing (Solver property) fraction_impervious (LegacySubcatchment property) FRACTION_IMPERVIOUS (SWMMSubcatchmentProperties attribute) from_curve() (XSectionGeometry class method) from_link() (XSectionGeometry class method) from_node (Link attribute) from_raw() (CrossSection class method) from_street() (XSectionGeometry class method) from_transect() (XSectionGeometry class method) full_area (XSectionGeometry property) full_depth (LegacyLink property) FULL_DEPTH (SWMMLinkProperties attribute) full_depth (XSectionGeometry property) full_flow (LegacyLink property) FULL_FLOW (SWMMLinkProperties attribute) full_hyd_radius (XSectionGeometry property) full_section_factor (XSectionGeometry property) full_volume (Node attribute) functional (StorageView attribute) fuse_virtual_junction() (ModelEditor method) G g1 (XSection attribute) g2 (XSection attribute) g3 (XSection attribute) g4 (XSection attribute) Gage (class in openswmm.engine._gages) gage (Subcatchment attribute) gage_coord() (Spatial method) gage_count (ModelEditor property) gage_name (HydrographGageEntry attribute) GAGE_RAINFALL (SWMMRainGageProperties attribute) gage_rainfall() (Forcing method) GAGE_SCALEFACTOR (SWMMRainGageProperties attribute) GAGE_SNOWFALL (SWMMRainGageProperties attribute) GAGE_TOTAL_PRECIPITATION (SWMMRainGageProperties attribute) Gages (class in openswmm.engine._gages) gages (Solver property) generation (ModelBuilder property) (Solver property) geom1 (CrossSection attribute) geom2 (CrossSection attribute) geom3 (CrossSection attribute) geom4 (CrossSection attribute) geom_labels (CrossSection property) geometry (StorageView attribute) geometry() (XSection method) GeoPackage (class in openswmm.engine._geopackage) get_api_evap_rate() (LegacySystem method) get_api_pet() (LegacySubcatchment method) get_api_temperature() (LegacySystem method) get_api_wind_speed() (LegacySystem method) get_bank_stations() (Transects method) get_buildup() (Quality method) get_climate_dry_only() (Forcing method) get_climate_temperature() (Forcing method) get_climate_wind_speed() (Forcing method) get_comments() (Transects method) get_coupling_flux() (Surface2D method) get_coupling_fluxes() (Surface2D method) get_crs() (ModelBuilder method) get_depth() (Surface2D method) get_depths() (Surface2D method) get_drain() (LIDs method) get_drainmat() (LIDs method) get_dwf() (Inflows method) get_edge_bc_cum_flux() (Surface2D method) get_edge_bc_flow() (Surface2D method) get_edge_bc_head() (Surface2D method) get_edge_bc_slope() (Surface2D method) get_edge_bc_type() (Surface2D method) get_edge_conveyance() (Surface2D method) get_edge_conveyance_bulk() (Surface2D method) get_edge_flux_bulk() (Surface2D method) get_edge_geometry_bulk() (Surface2D method) get_element_name() (Output method) get_element_names() (Output method) get_encroachment_stations() (Transects method) get_error_message() (in module openswmm.legacy.engine) get_evap_dry_only() (LegacySystem method) get_evap_pattern() (Aquifers method) get_evap_rate() (LegacySystem method) get_external() (Inflows method) get_file_path() (ModelBuilder method) get_gw_state() (Subcatchment method) get_head() (Surface2D method) get_heads() (Surface2D method) get_hydrograph() (Inflows method) get_hydrograph_gage() (Inflows method) get_hydrograph_group_id() (Inflows method) get_id() (Gages method) (Inlets method) (Landuses method) (LIDs method) (Links method) (Nodes method) (Pollutants method) (Streets method) (Subcatchments method) (Tables method) (Transects method) get_impervious() (Snowpacks method) get_index() (Gages method) (Inlets method) (Landuses method) (LIDs method) (Links method) (Nodes method) (Patterns method) (Pollutants method) (Streets method) (Subcatchments method) (Tables method) (Transects method) get_lid_unit_area() (LegacySubcatchment method) get_lid_unit_full_width() (LegacySubcatchment method) get_lid_unit_soil_moisture() (LegacySubcatchment method) get_lid_unit_surface_depth() (LegacySubcatchment method) get_link_statistics() (Solver method) get_link_timeseries() (Output method) get_link_values_by_time_and_attribute() (Output method) get_link_values_by_time_and_element_index() (Output method) get_mass_balance() (Surface2D method) get_mass_balance_error() (Solver method) get_modifiers() (Transects method) get_net_source() (Surface2D method) get_node_statistics() (Solver method) get_node_timeseries() (Output method) get_node_values_by_time_and_attribute() (Output method) get_node_values_by_time_and_element_index() (Output method) get_num_properties() (Output method) get_num_variables() (Output method) get_object_count() (Solver method) get_object_index() (Solver method) get_object_name() (Solver method) get_object_names() (Solver method) get_option() (ModelBuilder method) get_option_ext() (ModelBuilder method) get_param() (Aquifers method) get_params() (Inlets method) (Streets method) get_pavement() (LIDs method) get_pervious() (Snowpacks method) get_plowable() (Snowpacks method) get_pollutant_buildup() (LegacySubcatchment method) get_pollutant_concentration() (LegacyLink method) (LegacyNode method) get_pollutant_runoff_concentration() (LegacySubcatchment method) get_pollutant_total_load() (LegacySubcatchment method) get_property_code() (Output method) get_property_codes() (Output method) get_property_value() (Output method) get_property_values() (Output method) get_pump_statistics() (Solver method) get_rainfall() (Surface2D method) get_rdii() (Inflows method) get_rdii_decay() (Inflows method) get_removal() (Snowpacks method) get_removal_subcatch() (Snowpacks method) get_roughness() (Transects method) get_routing_totals() (Solver method) get_runoff_totals() (Solver method) get_snow_state() (LegacySubcatchment method) (Subcatchment method) get_soil() (LIDs method) get_stat_max_continuity_err() (Surface2D method) get_stat_max_depths() (Surface2D method) get_stat_max_velocities() (Surface2D method) get_station() (Transects method) get_storage() (LIDs method) get_subarea_depression_storage() (LegacySubcatchment method) get_subarea_depth() (LegacySubcatchment method) get_subarea_mannings_n() (LegacySubcatchment method) get_subarea_runoff() (LegacySubcatchment method) get_subcatchment_statistics() (Solver method) get_subcatchment_timeseries() (Output method) get_subcatchment_values_by_time_and_attribute() (Output method) get_subcatchment_values_by_time_and_element_index() (Output method) get_surface() (LIDs method) get_system_timeseries() (Output method) get_system_values_by_time() (Output method) get_system_values_by_time_and_attribute() (Output method) get_temperature() (LegacySystem method) get_tidal_curve() (OutfallView method) get_time_attribute() (Output method) get_timeseries() (OutfallView method) get_title_count() (ModelBuilder method) get_title_line() (ModelBuilder method) get_treatment() (Quality method) get_triangle_area() (Surface2D method) get_triangle_centroid() (Surface2D method) get_triangle_coupled_node() (Surface2D method) get_triangle_coupling_row() (Surface2D method) get_triangle_mannings() (Surface2D method) get_triangle_neighbours() (Surface2D method) get_triangle_tag() (Surface2D method) get_triangle_vertices() (Surface2D method) get_type() (Inlets method) (LIDs method) (Tables method) get_userflag_bool() (ModelBuilder method) get_userflag_def() (ModelBuilder method) get_userflag_int() (ModelBuilder method) get_userflag_real() (ModelBuilder method) get_userflag_value() (ModelBuilder method) get_value() (Solver method) (UserFlags method) get_variable_code() (Output method) get_variable_codes() (Output method) get_vertex_coords() (Surface2D method) get_vertex_coupled_node() (Surface2D method) get_vertex_coupling_area() (Surface2D method) get_vertex_coupling_cd() (Surface2D method) get_vertex_head() (Surface2D method) get_vertex_heads() (Surface2D method) get_vertex_render_depths() (Surface2D method) get_vertex_tag() (Surface2D method) get_vertex_xyz() (Surface2D method) get_washoff() (Quality method) get_wind_speed() (LegacySystem method) get_xsect_info() (Links method) GPM (FlowUnits attribute) (SWMMFlowUnits attribute) green_ampt (InfiltrationView attribute) groundwater (Subcatchment attribute) GROUNDWATER_INFLOW (SystemAttribute attribute) GROUNDWATER_OUTFLOW (SubcatchAttribute attribute) GROUNDWATER_TABLE_ELEVATION (SubcatchAttribute attribute) GroundwaterParams (class in openswmm.engine._subcatchments) gw_conc (Pollutant attribute) GW_CONCENTRATION (SWMMPollutantProperties attribute) gw_lower_depth (LegacySubcatchment property) GW_LOWER_DEPTH (SWMMSubcatchmentProperties attribute) gw_moisture (LegacySubcatchment property) GW_MOISTURE (SWMMSubcatchmentProperties attribute) gw_node (Subcatchment attribute) gw_params (Subcatchment attribute) H handle (ModelBuilder property) (Solver property) HAS_FLAPGATE (SWMMLinkProperties attribute) head (LegacyNode property) (Node attribute) HEAD_TOL (SWMMSystemProperties attribute) head_tolerance (LegacySystem property) heads (Nodes attribute) horton (InfiltrationView attribute) HotStart (class in openswmm.engine._hotstart) HOTSTART_FILE_FORMAT (SWMMAPIErrors attribute) HOTSTART_FILE_OPEN (SWMMAPIErrors attribute) HotStartError hstar (GroundwaterParams attribute) hyd_power (Link attribute) hyd_powers (Links attribute) hyd_radius() (XSectionGeometry method) hyd_radius_from_area() (XSectionGeometry method) HYDRAULIC_HEAD (NodeAttribute attribute) (SWMMNodeProperties attribute) hydrograph_count (Inflows attribute) hydrograph_gage_count (Inflows attribute) hydrograph_group_count (Inflows attribute) HydrographEntry (class in openswmm.engine._inflows) HydrographGageEntry (class in openswmm.engine._inflows) I id (ControlRule attribute) (Gage attribute) (Landuse attribute) (Link attribute) (Node attribute) (Pattern attribute) (Pollutant attribute) (Subcatchment attribute) ids (Gages attribute) (Links attribute) (Nodes attribute) (Subcatchments attribute) IGNORE_GROUNDWATER (SWMMSystemProperties attribute) IGNORE_QUALITY (SWMMSystemProperties attribute) IGNORE_RAINFALL (SWMMSystemProperties attribute) IGNORE_RDII (SWMMSystemProperties attribute) IGNORE_ROUTING (SWMMSystemProperties attribute) IGNORE_SNOWMELT (SWMMSystemProperties attribute) ImpactEntry (class in openswmm.engine._edit) imperv_pct (Subcatchment attribute) index (Gage attribute) (Landuse attribute) (LegacyLink property) (LegacyNode property) (LegacyRainGage property) (LegacySubcatchment property) (Link attribute) (Node attribute) (Pattern attribute) (Pollutant attribute) (Subcatchment attribute) infil (Subcatchment attribute) infils (Subcatchments attribute) infiltration (LegacySubcatchment property) (Subcatchment attribute) INFILTRATION (SWMMSubcatchmentProperties attribute) INFILTRATION_LOSS (SubcatchAttribute attribute) infiltration_model (LegacySubcatchment property) INFILTRATION_MODEL (SWMMSubcatchmentProperties attribute) InfiltrationView (class in openswmm.engine._subcatchments) inflow (Node attribute) Inflows (class in openswmm.engine._inflows) inflows (Nodes attribute) (Solver property) info() (XSection method) Infrastructure (class in openswmm.engine._infrastructure) infrastructure (Solver property) init_conc (Pollutant attribute) INIT_CONCENTRATION (SWMMPollutantProperties attribute) init_state (PumpView attribute) initial_depth (LegacyNode property) (Node attribute) INITIAL_DEPTH (SWMMNodeProperties attribute) initial_flow (LegacyLink property) (Link attribute) INITIAL_FLOW (SWMMLinkProperties attribute) initialize() (Solver method), [1] INLET (SWMMObjects attribute) inlet_loss (LegacyLink property) INLET_LOSS (SWMMLinkProperties attribute) Inlets (class in openswmm.engine._infrastructure) inlets (Infrastructure attribute) insert() (Controls method) (EventsView method) (SaveSchedule method) INTERTIAL_DAMPING (SWMMSystemProperties attribute) INVERT_DEPTH (NodeAttribute attribute) invert_elev (Node attribute) invert_elevation (LegacyNode property) INVERT_ELEVATION (SWMMNodeProperties attribute) is_active (Surface2D property) is_between_events (Solver property) is_open (XSectionGeometry property) is_registered() (in module openswmm.engine._geopackage) is_virtual (Node attribute) J JUNCTION (SWMMNodeTypes attribute) K k (HydrographEntry attribute) k_0 (RDIIDecayEntry attribute) k_dep (RDIIDecayEntry attribute) k_T (RDIIDecayEntry attribute) kdecay (Pollutant attribute) KDECAY (SWMMPollutantProperties attribute) L Landuse (class in openswmm.engine._quality) LANDUSE (SWMMObjects attribute) Landuses (class in openswmm.engine._quality) landuses (Quality attribute) last_error (GeoPackage property) LAT_FLOW_TOL (SWMMSystemProperties attribute) lat_flow_tolerance (LegacySystem property) lateral_inflow (LegacyNode property) (Node attribute) LATERAL_INFLOW (NodeAttribute attribute) (SWMMNodeProperties attribute) lateral_inflows (Nodes attribute) LegacyLink (class in openswmm.legacy.engine) LegacyLinks (class in openswmm.legacy.engine) LegacyNode (class in openswmm.legacy.engine) LegacyNodes (class in openswmm.legacy.engine) LegacyRainGage (class in openswmm.legacy.engine) LegacyRainGages (class in openswmm.legacy.engine) LegacySubcatchment (class in openswmm.legacy.engine) LegacySubcatchments (class in openswmm.legacy.engine) LegacySystem (class in openswmm.legacy.engine) length (LegacyLink property) (Link attribute) LENGTH (SWMMLinkProperties attribute) LENGTHENING_STEP (SWMMSystemProperties attribute) LID (SWMMObjects attribute) LID_UNIT_AREA (SWMMSubcatchmentProperties attribute) LID_UNIT_BOTTOM_WIDTH (SWMMSubcatchmentProperties attribute) LID_UNIT_FROM_IMPERVIOUS (SWMMSubcatchmentProperties attribute) LID_UNIT_FROM_PERVIOUS (SWMMSubcatchmentProperties attribute) LID_UNIT_FULL_WIDTH (SWMMSubcatchmentProperties attribute) LID_UNIT_GREEN_AMPT_CAPILLARY_SUCTION (SWMMSubcatchmentProperties attribute) LID_UNIT_GREEN_AMPT_MAX_SOIL_MOISTURE_DEFICIT (SWMMSubcatchmentProperties attribute) LID_UNIT_GREEN_AMPT_SATURATED_CONDUCTIVITY (SWMMSubcatchmentProperties attribute) LID_UNIT_INIT_SATURATION (SWMMSubcatchmentProperties attribute) LID_UNIT_RECEIVING_OUTLET_INDEX (SWMMSubcatchmentProperties attribute) LID_UNIT_RECEIVING_OUTLET_TYPE (SWMMSubcatchmentProperties attribute) LID_UNIT_REPLICATES (SWMMSubcatchmentProperties attribute) LID_UNIT_SOIL_MOISTURE (SWMMSubcatchmentProperties attribute) LID_UNIT_SURFACE_DEPTH (SWMMSubcatchmentProperties attribute) LID_UNIT_TO_PERVIOUS (SWMMSubcatchmentProperties attribute) lid_units_count (LegacySubcatchment property) LID_UNITS_COUNT (SWMMSubcatchmentProperties attribute) LID_UNITS_DRAIN_FLOW (SWMMSubcatchmentProperties attribute) LID_UNITS_FLOW_TO_PERV_AREA (SWMMSubcatchmentProperties attribute) LID_UNITS_PERV_AREA (SWMMSubcatchmentProperties attribute) LIDs (class in openswmm.engine._infrastructure) lids (Infrastructure attribute) LifecycleError Link (class in openswmm.engine._links) LINK (ElementType attribute) (SWMMObjects attribute) link_attributes() (OutputReader method) link_coord() (Spatial method) link_count (HotStart property) (ModelEditor property) (OutputReader attribute) link_flow() (Forcing method) link_ids (OutputReader attribute) link_max_filling (Statistics property) link_max_filling_at() (Statistics method) link_max_flow (Statistics property) link_max_flow_at() (Statistics method) link_max_velocity (Statistics property) link_max_velocity_at() (Statistics method) link_quality() (Forcing method) link_result() (OutputReader method) link_series() (OutputReader method) link_setting() (Forcing method) link_surcharge_time (Statistics property) link_surcharge_time_at() (Statistics method) link_type (LegacyLink property) link_vertices() (Spatial method) link_vol_flow (Statistics property) link_vol_flow_at() (Statistics method) LinkAttribute (class in openswmm.legacy.output) Links (class in openswmm.engine._links) links (Solver property) LinkStatsView (class in openswmm.engine._links) loss_coeff (Link attribute) losses (Node attribute) (Nodes attribute) LOWER_EVAP_DEPTH (SWMMAquiferProperties attribute) LOWER_LOSS_COEFF (SWMMAquiferProperties attribute) LPS (FlowUnits attribute) (SWMMFlowUnits attribute) M mass_balance (Solver property) mass_balance_error (LegacySystem property) MassBalance (class in openswmm.engine._massbalance) max_area (XSectionGeometry property) max_courant (MassBalance property) max_depth (LegacyNode property) (Node attribute) (NodeStatsView attribute) (Surface2D property) MAX_DEPTH (SWMMNodeProperties attribute) max_filling (LinkStatsView attribute) max_flow (Link attribute) (LinkStatsView attribute) max_overflow (NodeStatsView attribute) MAX_ROUTING_STEP (SWMMSystemProperties attribute) max_runoff (SubcatchmentStatsView attribute) MAX_TRIALS (SWMMSystemProperties attribute) max_velocity (LinkStatsView attribute) max_width (XSectionGeometry property) message (EngineError attribute) MG (ConcentrationUnits attribute) MGD (FlowUnits attribute) (SWMMFlowUnits attribute) MIN_ROUTE_STEP (SWMMSystemProperties attribute) MIN_SLOPE (SWMMSystemProperties attribute) MIN_SURF_AREA (SWMMSystemProperties attribute) MLD (FlowUnits attribute) (SWMMFlowUnits attribute) model (InfiltrationView attribute) ModelBuilder (class in openswmm.engine._model) ModelEditor (class in openswmm.engine._edit) module openswmm openswmm.engine openswmm.engine._2d openswmm.engine._controls openswmm.engine._dates openswmm.engine._datetime openswmm.engine._edit openswmm.engine._exceptions openswmm.engine._forcing openswmm.engine._gages openswmm.engine._geometry openswmm.engine._geopackage openswmm.engine._hotstart openswmm.engine._inflows openswmm.engine._infrastructure openswmm.engine._links openswmm.engine._massbalance openswmm.engine._model openswmm.engine._nodes openswmm.engine._output_reader openswmm.engine._pollutants openswmm.engine._quality openswmm.engine._solver openswmm.engine._spatial openswmm.engine._statistics openswmm.engine._subcatchments openswmm.engine._tables openswmm.engine._xsect openswmm.legacy.engine openswmm.legacy.output month (HydrographEntry attribute) mwt (Pollutant attribute) N n_imperv (Subcatchment attribute) n_perv (Subcatchment attribute) n_triangles (Surface2D property) n_vertices (Surface2D property) name (LegacyLink property) (LegacyNode property) (LegacyRainGage property) (LegacySubcatchment property) (UserFlagDef attribute) new_type (ConversionResult attribute) NO_REPORT_FLAG (SWMMSystemProperties attribute) Node (class in openswmm.engine._nodes) NODE (ElementType attribute) (SWMMObjects attribute) node_attributes() (OutputReader method) node_coord() (Spatial method) node_coords() (Spatial method) node_count (HotStart property) (ModelEditor property) (OutputReader attribute) node_head_boundary() (Forcing method) node_ids (OutputReader attribute) node_index (RDIIEntry attribute) node_lat_inflow() (Forcing method) node_max_depth (Statistics property) node_max_depth_at() (Statistics method) node_max_overflow (Statistics property) node_max_overflow_at() (Statistics method) node_quality() (Forcing method) node_result() (OutputReader method) node_series() (OutputReader method) node_stats() (OutputReader method) node_time_flooded (Statistics property) node_time_flooded_at() (Statistics method) node_type (LegacyNode property) node_vol_flooded (Statistics property) node_vol_flooded_at() (Statistics method) NodeAttribute (class in openswmm.legacy.output) Nodes (class in openswmm.engine._nodes) nodes (Solver property) NodeStatsView (class in openswmm.engine._nodes) NONE (ConcentrationUnits attribute) NORMAL_FLOW_LIMITED (SWMMSystemProperties attribute) NUM_PERIODS (TimeAttribute attribute) num_threads (LegacySystem property) NUM_THREADS (SWMMSystemProperties attribute) NumericalError O oadate_to_datetime() (in module openswmm.engine._dates) obj_idx (ImpactEntry attribute) obj_type (ImpactEntry attribute) obj_type_name (ImpactEntry attribute) object_counts() (GeoPackage method) OBJECT_INDEX (SWMMAPIErrors attribute) OBJECT_NAME (SWMMAPIErrors attribute) OBJECT_TYPE (SWMMAPIErrors attribute) observed_series_count() (GeoPackage method) observed_value_count() (GeoPackage method) offset_dn (Link attribute) offset_up (Link attribute) OPEN (SolverState attribute) open() (HotStart class method) (Solver method), [1] open_close_rate (OrificeView attribute) open_errors (Solver property) open_runoff_interface_read() (Solver method) open_runoff_interface_write() (Solver method) open_warnings (Solver property) openswmm module openswmm.engine module openswmm.engine._2d module openswmm.engine._controls module openswmm.engine._dates module openswmm.engine._datetime module openswmm.engine._edit module openswmm.engine._exceptions module openswmm.engine._forcing module openswmm.engine._gages module openswmm.engine._geometry module openswmm.engine._geopackage module openswmm.engine._hotstart module openswmm.engine._inflows module openswmm.engine._infrastructure module openswmm.engine._links module openswmm.engine._massbalance module openswmm.engine._model module openswmm.engine._nodes module openswmm.engine._output_reader module openswmm.engine._pollutants module openswmm.engine._quality module openswmm.engine._solver module openswmm.engine._spatial module openswmm.engine._statistics module openswmm.engine._subcatchments module openswmm.engine._tables module openswmm.engine._xsect module openswmm.legacy.engine module openswmm.legacy.output module options (Solver property) orifice (Link attribute) ORIFICE (SWMMLinkTypes attribute) OrificeView (class in openswmm.engine._links) outfall (Node attribute) OUTFALL (SWMMNodeTypes attribute) OUTFALL_FLOWS (SystemAttribute attribute) OutfallView (class in openswmm.engine._nodes) outflow (LegacyNode property) (Node attribute) OUTFLOW (SWMMNodeProperties attribute) outflows (Nodes attribute) outlet (Link attribute) (Subcatchment attribute) OUTLET (SWMMLinkTypes attribute) outlet_index (LegacySubcatchment property) OUTLET_INDEX (SWMMSubcatchmentProperties attribute) outlet_loss (LegacyLink property) OUTLET_LOSS (SWMMLinkProperties attribute) outlet_type (LegacySubcatchment property) OUTLET_TYPE (SWMMSubcatchmentProperties attribute) OutletView (class in openswmm.engine._links) Output (class in openswmm.legacy.output) output_size (Output property) OutputReader (class in openswmm.engine._output_reader) overflow (Node attribute) overflows (Nodes attribute) P param (OutfallView attribute) ParseError path (SaveScheduleEntry attribute) Pattern (class in openswmm.engine._tables) Patterns (class in openswmm.engine._tables) patterns (Solver property) period_count (OutputReader attribute) period_times (OutputReader attribute) plugin_get() (ModelBuilder method) plugin_remove() (ModelBuilder method) plugin_set() (ModelBuilder method) PluginError plugins_count() (ModelBuilder method) points (Curve attribute) (TimeSeries attribute) Pollutant (class in openswmm.engine._pollutants) POLLUTANT (ElementType attribute) (SWMMObjects attribute) POLLUTANT_BUILDUP (SWMMSubcatchmentProperties attribute) POLLUTANT_CONCENTRATION (LinkAttribute attribute) (NodeAttribute attribute) (SubcatchAttribute attribute) (SWMMLinkProperties attribute) (SWMMNodeProperties attribute) pollutant_count (OutputReader attribute) POLLUTANT_LATERAL_MASS_FLUX (SWMMLinkProperties attribute) (SWMMNodeProperties attribute) POLLUTANT_LOAD (SWMMLinkProperties attribute) POLLUTANT_PONDED_CONCENTRATION (SWMMSubcatchmentProperties attribute) POLLUTANT_RUNOFF_CONCENTRATION (SWMMSubcatchmentProperties attribute) POLLUTANT_TOTAL_LOAD (SWMMSubcatchmentProperties attribute) pollutant_units (Output property) Pollutants (class in openswmm.engine._pollutants) pollutants (Solver property) ponded_area (LegacyNode property) (Node attribute) ponded_quality() (Subcatchment method) PONDING_AREA (SWMMNodeProperties attribute) pop_last() (Links method) (Nodes method) pop_last_link() (ModelBuilder method) pop_last_node() (ModelBuilder method) POROSITY (SWMMAquiferProperties attribute) precip (SubcatchmentStatsView attribute) prepare_for_edit() (Surface2D method) progress_callbacks_per_second (Solver property) PROJECT_NOT_OPENED (SWMMAPIErrors attribute) PROPERTY_TYPE (SWMMAPIErrors attribute) PROPERTY_VALUE (SWMMAPIErrors attribute) pump (Link attribute) PUMP (SWMMLinkTypes attribute) pump_cycles (LinkStatsView attribute) pump_on_time (LinkStatsView attribute) pump_statistics (LegacyLink property) pump_stats() (Links method) pump_volume (LinkStatsView attribute) PumpView (class in openswmm.engine._links) Q QUAL_ERROR (SWMMSystemProperties attribute) qualities() (Links method) (Nodes method) (Subcatchments method) Quality (class in openswmm.engine._quality) quality (Solver property) quality() (Link method) (Node method) (Subcatchment method) quality_continuity_error() (MassBalance method) quality_error (LegacySystem property) quality_evap_loss() (MassBalance method) quality_seep_loss() (MassBalance method) query_double() (GeoPackage method) query_int() (GeoPackage method) R r (HydrographEntry attribute) rain_conc (Pollutant attribute) RAIN_CONCENTRATION (SWMMPollutantProperties attribute) RAIN_GAGE (SWMMObjects attribute) rain_interval (Gage attribute) rain_scale_factor (LegacySubcatchment property) RAIN_SCALE_FACTOR (SWMMSubcatchmentProperties attribute) rain_type (Gage attribute) rain_units (Gage attribute) rainfall (Gage attribute) (LegacyRainGage property) (LegacySubcatchment property) RAINFALL (SubcatchAttribute attribute) rainfall (Subcatchment attribute) RAINFALL (SWMMSubcatchmentProperties attribute) (SystemAttribute attribute) rainfalls (Gages attribute) (Subcatchments attribute) RAINGAGE (SWMMSubcatchmentProperties attribute) raise_for_code() (in module openswmm.engine._exceptions) rating_type (OutletView attribute) rdii_conc (Pollutant attribute) RDII_CONCENTRATION (SWMMPollutantProperties attribute) rdii_count (Inflows attribute) rdii_decay_count (Inflows attribute) RDII_INFLOW (SystemAttribute attribute) RDIIDecayEntry (class in openswmm.engine._inflows) RDIIEntry (class in openswmm.engine._inflows) read_observed_values() (GeoPackage method) read_result_ts() (GeoPackage method) read_runoff_step() (Solver method) read_summary() (GeoPackage method) record() (ExternalForcingLog method) records (ExternalForcingLog property) register() (in module openswmm.engine._geopackage) remove() (Patterns method) (Transects method) remove_dwf() (Inflows method) remove_external() (Inflows method) remove_hydrograph_entry() (Inflows method) remove_hydrograph_group() (Inflows method) remove_rdii() (Inflows method) remove_rdii_decay() (Inflows method) remove_rule() (Controls method) rename() (Gages method) (Links method) (Nodes method) (Patterns method) (Subcatchments method) (Transects method) rename_hydrograph_group() (Inflows method) report() (Solver method), [1] REPORT_FLAG (SWMMLinkProperties attribute) (SWMMNodeProperties attribute) (SWMMSubcatchmentProperties attribute) REPORT_START_DATE (SWMMSystemProperties attribute) report_start_datetime (ModelBuilder attribute) (ModelEditor attribute) (SimulationOptions property) (Solver property), [1] report_step (LegacySystem property) (OutputReader attribute) REPORT_STEP (SWMMSystemProperties attribute) (TimeAttribute attribute) REPORTED (SolverState attribute) reporting_step (Solver property) reset_edge_conveyance() (Surface2D method) response (HydrographEntry attribute) (RDIIDecayEntry attribute) result_ts_count() (GeoPackage method) rollback() (GeoPackage method) roughness (Link attribute) route_to (OutfallView attribute) routing_continuity_error (MassBalance property) routing_diagnostics (MassBalance property) routing_step (LegacySystem property) (SimulationOptions property) (Solver property), [1] ROUTING_STEP (SWMMSystemProperties attribute) routing_total() (MassBalance method) routing_totals (LegacySystem property) RULE_STEP (SWMMSystemProperties attribute) run() (in module openswmm.engine._solver) (Solver method) run_solver() (in module openswmm.legacy.engine) run_with_callback() (in module openswmm.engine._solver) runoff (LegacySubcatchment property) (Subcatchment attribute) RUNOFF (SWMMSubcatchmentProperties attribute) runoff_continuity_error (MassBalance property) runoff_error (LegacySystem property) RUNOFF_ERROR (SWMMSystemProperties attribute) RUNOFF_FLOW (SystemAttribute attribute) RUNOFF_RATE (SubcatchAttribute attribute) runoff_total() (MassBalance method) runoff_totals (LegacySystem property) runoff_vol (SubcatchmentStatsView attribute) runoffs (Subcatchments attribute) S save_from() (HotStart static method) save_hotstart() (Solver method) save_runoff_step() (Solver method) save_schedule (Solver property) SaveSchedule (class in openswmm.engine._hotstart) SaveScheduleEntry (class in openswmm.engine._hotstart) scale_factor (Gage attribute) (LegacyRainGage property) section_factor() (XSectionGeometry method) seep_rate (Link attribute) (StorageView attribute) seepage_rate (LegacyLink property) SEEPAGE_RATE (SWMMLinkProperties attribute) set_api_evap_rate() (LegacySystem method) set_api_pet() (LegacySubcatchment method) set_api_rainfall() (LegacySubcatchment method) set_api_snowfall() (LegacySubcatchment method) set_api_temperature() (LegacySystem method) set_api_wind_speed() (LegacySystem method) set_bank_stations() (Transects method) set_buildup() (Quality method) set_co_pollutant() (Pollutant method) set_comments() (Transects method) set_curve_number() (InfiltrationView method) set_depth() (LegacyNode method) set_drain() (LIDs method) set_drainmat() (LIDs method) set_dwf_baseline() (Inflows method) set_edge_bc_flow() (Surface2D method) set_edge_bc_flow_tseries_name() (Surface2D method) set_edge_bc_head() (Surface2D method) set_edge_bc_rating_curve_name() (Surface2D method) set_edge_bc_slope() (Surface2D method) set_edge_bc_tseries_name() (Surface2D method) set_edge_bc_type() (Surface2D method) set_edge_conveyance() (Surface2D method) set_encroachment_stations() (Transects method) set_evap_dry_only() (LegacySystem method) set_evap_pattern() (Aquifers method) set_external_baseline() (Inflows method) set_external_pollutant_buildup() (LegacySubcatchment method) set_external_scale() (Inflows method) set_factors() (Pattern method) set_file() (Gage method) set_file_path() (ModelBuilder method) set_flow() (LegacyLink method) set_gage_coord() (Spatial method) set_green_ampt() (InfiltrationView method) set_gw_params() (Subcatchment method) set_gw_state() (Subcatchment method) set_head_boundary() (Node method) set_horton() (InfiltrationView method) set_hydrograph_gage() (Inflows method) set_hydrograph_ia() (Inflows method) set_hydrograph_rtk() (Inflows method) set_impervious() (Snowpacks method) set_lateral_inflow() (LegacyNode method) set_lateral_inflows() (Nodes method) set_lenient_open() (Solver method) set_lid_drain() (Solver method) set_link_coord() (Spatial method) set_link_depth() (HotStart method) set_link_flow() (HotStart method) set_link_length() (ModelBuilder method) set_link_nodes() (ModelBuilder method) set_link_quality() (Pollutants method) set_link_roughness() (ModelBuilder method) set_link_setting() (Controls method) set_link_status() (Controls method) set_link_vertices() (Spatial method) set_link_xsect() (ModelBuilder method) set_modifiers() (Transects method) set_node_coord() (Spatial method) set_node_coords() (Spatial method) set_node_depth() (HotStart method) set_node_head() (HotStart method) set_node_invert() (ModelBuilder method) set_node_max_depth() (ModelBuilder method) set_node_quality() (Pollutants method) set_node_virtual() (ModelEditor method) set_nodes() (Link method) set_option() (ModelBuilder method) set_option_ext() (ModelBuilder method) set_outlet_node() (Subcatchment method) set_outlet_subcatchment() (Subcatchment method) set_param() (Aquifers method) set_params() (Inlets method) (Streets method) set_pavement() (LIDs method) set_pervious() (Snowpacks method) set_plowable() (Snowpacks method) set_pollutant_lateral_mass_flux() (LegacyNode method) set_ponded_concentration() (LegacySubcatchment method) set_ponded_quality() (Subcatchment method) set_progress_callback() (Solver method) set_quality_mass_flux() (Node method) set_rain_interval() (Gage method) set_rainfall() (LegacyRainGage method) set_rdii_decay() (Inflows method) set_removal() (Snowpacks method) set_removal_subcatch() (Snowpacks method) set_roughness() (Transects method) set_setting() (LegacyLink method) set_snow_state() (LegacySubcatchment method) (Subcatchment method) set_soil() (LIDs method) set_stage() (OutfallView method) set_step_begin_callback() (Solver method) set_step_end_callback() (Solver method) set_storage() (LIDs method) set_subcatchment_coord() (Spatial method) set_subcatchment_polygon() (Spatial method) set_subcatchment_runoff() (HotStart method) set_surface() (LIDs method) set_tidal_curve() (OutfallView method) set_timeseries() (Gage method) (OutfallView method) set_title() (ModelBuilder method) set_treatment() (Quality method) (Solver method) set_triangle_mannings() (Surface2D method) set_triangle_tag() (Surface2D method) set_userflag_bool() (ModelBuilder method) set_userflag_int() (ModelBuilder method) set_userflag_real() (ModelBuilder method) set_userflag_value() (ModelBuilder method) set_value() (Solver method) (UserFlags method) set_vertex_coupled_node() (Surface2D method) set_vertex_coupling_area() (Surface2D method) set_vertex_coupling_cd() (Surface2D method) set_vertex_tag() (Surface2D method) set_vertex_z() (Surface2D method) set_warning_callback() (Solver method) set_washoff() (Quality method) setting (LegacyLink property) SETTING (SWMMLinkProperties attribute) shape (CrossSection attribute) (StorageView attribute) (XSection attribute) (XSectionGeometry attribute) shape_name (CrossSection attribute) shape_name() (in module openswmm.engine._xsect) shutoff_depth (PumpView attribute) SI (UnitSystem attribute) sim_datetime (HotStart property) sim_end_time (Solver property) sim_start_time (Solver property) simulation_count() (GeoPackage method) simulation_ids() (GeoPackage method) SIMULATION_IS_RUNNING (SWMMAPIErrors attribute) SIMULATION_NOT_ENDED (SWMMAPIErrors attribute) SIMULATION_NOT_STARTED (SWMMAPIErrors attribute) SimulationOptions (class in openswmm.engine._solver) SKIP_STEADY_STATE (SWMMSystemProperties attribute) slope (LegacyLink property) (LegacySubcatchment property) (Link attribute) (Subcatchment attribute) SLOPE (SWMMLinkProperties attribute) (SWMMSubcatchmentProperties attribute) SNOW_ATI (SWMMSubcatchmentProperties attribute) SNOW_COLDC (SWMMSubcatchmentProperties attribute) snow_ddf (RDIIDecayEntry attribute) SNOW_DEPTH (SubcatchAttribute attribute) snow_depth (Subcatchment attribute) SNOW_DEPTH (SystemAttribute attribute) snow_depths (Subcatchments attribute) snow_factor (Gage attribute) SNOW_FW (SWMMSubcatchmentProperties attribute) snow_on (RDIIDecayEntry attribute) snow_only (Pollutant attribute) SNOW_ONLY (SWMMPollutantProperties attribute) snow_scale_factor (LegacySubcatchment property) SNOW_SCALE_FACTOR (SWMMSubcatchmentProperties attribute) SNOW_SWE (SWMMSubcatchmentProperties attribute) snow_T (RDIIDecayEntry attribute) snowfall (LegacyRainGage property) SNOWPACK (SWMMObjects attribute) Snowpacks (class in openswmm.engine._subcatchments) snowpacks (Solver property) SOIL_MOISTURE (SubcatchAttribute attribute) Solver (class in openswmm.engine._solver) (class in openswmm.legacy.engine) solver (Gage attribute) (Link attribute) (Node attribute) (Pattern attribute) (Pollutant attribute) (Subcatchment attribute) solver_last_step (Surface2D property) solver_state (Solver property) solver_steps (Surface2D property) SolverState (class in openswmm.legacy.engine) Spatial (class in openswmm.engine._spatial) spatial (Solver property) split_conduit() (ModelEditor method) StaleObjectError start (Event attribute) start() (Solver method), [1] start_date (Output property) START_DATE (SWMMSystemProperties attribute) start_datetime (ModelBuilder attribute) (ModelEditor attribute) (OutputReader attribute) (SimulationOptions property) (Solver property), [1] START_DRY_DAYS (SWMMSystemProperties attribute) START_NODE (SWMMLinkProperties attribute) start_node_offset (LegacyLink property) START_NODE_OFFSET (SWMMLinkProperties attribute) STARTED (SolverState attribute) startup_depth (PumpView attribute) state (Solver property) station_count() (Transects method) station_id (Gage attribute) stations() (Transects method) Statistics (class in openswmm.engine._statistics) statistics (LegacyLink property) (LegacyNode property) (LegacySubcatchment property) (Solver property) stats (Link attribute) (Node attribute) (Subcatchment attribute) steady_state_skip (Solver property) step() (Solver method), [1] steps() (Solver method) storage (Node attribute) STORAGE (SWMMNodeTypes attribute) StorageView (class in openswmm.engine._nodes) STORED_VOLUME (NodeAttribute attribute) STREET (SWMMObjects attribute) Streets (class in openswmm.engine._infrastructure) streets (Infrastructure attribute) stride() (Solver method) stride_step (Solver property) SUB_AREA_DEPRESSION_STORAGE (SWMMSubcatchmentProperties attribute) SUB_AREA_DEPTH (SWMMSubcatchmentProperties attribute) SUB_AREA_FRACTION_AREA (SWMMSubcatchmentProperties attribute) SUB_AREA_FRACTION_OUTLET (SWMMSubcatchmentProperties attribute) SUB_AREA_INFLOW (SWMMSubcatchmentProperties attribute) SUB_AREA_MANNINGS_N (SWMMSubcatchmentProperties attribute) SUB_AREA_ROUTE_TO (SWMMSubcatchmentProperties attribute) SUB_AREA_RUNOFF (SWMMSubcatchmentProperties attribute) subcatch_count (ModelEditor property) SubcatchAttribute (class in openswmm.legacy.output) Subcatchment (class in openswmm.engine._subcatchments) SUBCATCHMENT (ElementType attribute) (SWMMObjects attribute) subcatchment_attributes() (OutputReader method) subcatchment_coord() (Spatial method) subcatchment_count (OutputReader attribute) subcatchment_evap() (Forcing method) subcatchment_ids (OutputReader attribute) subcatchment_max_runoff (Statistics property) subcatchment_max_runoff_at() (Statistics method) subcatchment_polygon() (Spatial method) subcatchment_precip (Statistics property) subcatchment_rainfall() (Forcing method) subcatchment_result() (OutputReader method) subcatchment_runoff_vol (Statistics property) subcatchment_runoff_vol_at() (Statistics method) subcatchment_series() (OutputReader method) subcatchment_snowfall() (Forcing method) Subcatchments (class in openswmm.engine._subcatchments) subcatchments (Solver property) SubcatchmentStatsView (class in openswmm.engine._subcatchments) surcharge_depth (LegacyNode property) (Node attribute) SURCHARGE_DEPTH (SWMMNodeProperties attribute) SURCHARGE_METHOD (SWMMSystemProperties attribute) surcharge_time (LinkStatsView attribute) surf_elev (GroundwaterParams attribute) Surface2D (class in openswmm.engine._2d) surface2d (Solver property) SWEEP_END (SWMMSystemProperties attribute) sweep_interval (Landuse attribute) SWEEP_INTERVAL (SWMMLandUseProperties attribute) sweep_removal (Landuse attribute) SWEEP_REMOVAL (SWMMLandUseProperties attribute) SWEEP_START (SWMMSystemProperties attribute) SWMMAPIErrors (class in openswmm.legacy.engine) SWMMAquiferProperties (class in openswmm.legacy.engine) SWMMFlowUnits (class in openswmm.legacy.engine) SWMMLandUseProperties (class in openswmm.legacy.engine) SWMMLinkProperties (class in openswmm.legacy.engine) SWMMLinkTypes (class in openswmm.legacy.engine) SWMMNodeProperties (class in openswmm.legacy.engine) SWMMNodeTypes (class in openswmm.legacy.engine) SWMMObjects (class in openswmm.legacy.engine) SWMMOutputException SWMMPatternProperties (class in openswmm.legacy.engine) SWMMPollutantProperties (class in openswmm.legacy.engine) SWMMRainGageProperties (class in openswmm.legacy.engine) SWMMSolverException SWMMSubcatchmentProperties (class in openswmm.legacy.engine) SWMMSystemProperties (class in openswmm.legacy.engine) SYS_FLOW_TOL (SWMMSystemProperties attribute) sys_flow_tolerance (LegacySystem property) SYSTEM (ElementType attribute) (SWMMObjects attribute) system_result() (OutputReader method) system_series() (OutputReader method) SystemAttribute (class in openswmm.legacy.output) T t (HydrographEntry attribute) T_freeze (RDIIDecayEntry attribute) T_ref (RDIIDecayEntry attribute) table_count (ModelEditor property) Tables (class in openswmm.engine._tables) tables (Solver property) tag (Link attribute) (Node attribute) (Subcatchment attribute) target_setting (Link attribute) target_settings (Links attribute) TEMPERATURE (SWMMSystemProperties attribute) TENSION_SLOPE (SWMMAquiferProperties attribute) text (ControlRule attribute) theta_rec (RDIIDecayEntry attribute) TIME_CLOSED (SWMMLinkProperties attribute) time_diff() (in module openswmm.engine._datetime) time_flooded (NodeStatsView attribute) TIME_OPEN (SWMMLinkProperties attribute) TIME_PATTERN (SWMMObjects attribute) TIME_PERIOD (SWMMAPIErrors attribute) TimeAttribute (class in openswmm.legacy.output) times (Output property) TimeSeries (class in openswmm.engine._tables) timeseries (Gage attribute) TIMESERIES (SWMMObjects attribute) to_dataframe() (ExternalForcingLog method) to_node (Link attribute) to_solver() (ModelBuilder method) TOP_WIDTH (SWMMLinkProperties attribute) topology_edge_count() (GeoPackage method) total_exchange_flow (Surface2D property) total_inflow (LegacyNode property) TOTAL_INFLOW (NodeAttribute attribute) (SWMMNodeProperties attribute) TOTAL_LATERAL_INFLOW (SystemAttribute attribute) total_precipitation (LegacyRainGage property) total_steps (LegacySystem property) TOTAL_STEPS (SWMMSystemProperties attribute) total_volume (Surface2D property) TRANSECT (SWMMObjects attribute) Transects (class in openswmm.engine._infrastructure) transects (Infrastructure attribute) triangle_coupling_count (Surface2D property) triangle_coupling_rows (Surface2D property) tw (GroundwaterParams attribute) type (DividerView attribute) (Link attribute) (Node attribute) (OrificeView attribute) (OutfallView attribute) (Pattern attribute) TYPE (SWMMLinkProperties attribute) (SWMMNodeProperties attribute) (SWMMPatternProperties attribute) type (UserFlagDef attribute) (WeirView attribute) U UG (ConcentrationUnits attribute) uh_name (HydrographEntry attribute) (HydrographGageEntry attribute) (RDIIDecayEntry attribute) (RDIIEntry attribute) undefine() (UserFlags method) undefine_userflag() (ModelBuilder method) UNIT_HYDROGRAPH (SWMMObjects attribute) unit_system (LegacySystem property) (Solver property) UNIT_SYSTEM (SWMMSystemProperties attribute) units (Output property) (Pollutant attribute) (XSectionGeometry property) UnitSystem (class in openswmm.legacy.output) until() (Solver method) UPPER_EVAP_FRAC (SWMMAquiferProperties attribute) UPPER_MOISTURE (SWMMAquiferProperties attribute) US (UnitSystem attribute) usage_add() (LIDs method) usage_count() (LIDs method) usage_get() (LIDs method) usage_remove() (LIDs method) use_hotstart() (Solver method) userflag_def_count() (ModelBuilder method) UserFlagDef (class in openswmm.engine._solver) UserFlags (class in openswmm.engine._solver) userflags (Solver property) V validate() (ModelBuilder method) validate_message() (Controls method) variable_count() (GeoPackage method) velocities (Links attribute) velocity (LegacyLink property) (Link attribute) VELOCITY (SWMMLinkProperties attribute) version (Output property) (OutputReader attribute) version() (in module openswmm.legacy.engine) vertex_coupling_count (Surface2D property) virtual_rule_violation (Node attribute) vol_flooded (NodeStatsView attribute) vol_flow (LinkStatsView attribute) volume (LegacyLink property) (LegacyNode property) (Link attribute) (Node attribute) VOLUME (SWMMLinkProperties attribute) (SWMMNodeProperties attribute) VOLUME_STORED (SystemAttribute attribute) volumes (Links attribute) (Nodes attribute) W warnings (ConversionResult attribute) (HotStart property) WASHOFF_BMP_EFFIC (SWMMLandUseProperties attribute) WASHOFF_COEFF (SWMMLandUseProperties attribute) WASHOFF_EXPON (SWMMLandUseProperties attribute) WASHOFF_FUNC (SWMMLandUseProperties attribute) WASHOFF_SWEEP_EFFIC (SWMMLandUseProperties attribute) WATER_TABLE_ELEV (SWMMAquiferProperties attribute) weir (Link attribute) WEIR (SWMMLinkTypes attribute) WeirView (class in openswmm.engine._links) when (SaveScheduleEntry attribute) width (LegacySubcatchment property) (Subcatchment attribute) WIDTH (SWMMSubcatchmentProperties attribute) width() (XSectionGeometry method) WILTING_POINT (SWMMAquiferProperties attribute) WIND_SPEED (SWMMSystemProperties attribute) write() (ModelBuilder method) (Solver method) write_geopackage() (Solver method) write_observed_value() (GeoPackage method) write_observed_values() (GeoPackage method) write_with_plugin() (ModelBuilder method) (Solver method) X xsect (Link property) XSection (class in openswmm.engine._links) XSECTION_SHAPE (SWMMObjects attribute) XSectionGeometry (class in openswmm.engine._xsect) Z zero_imperv_pct (Subcatchment attribute)
