mesh::FacingPairOptions Struct Reference

#include <breaklinestrips.h>

Collaboration diagram for mesh::FacingPairOptions:

Public Attributes
double	minWidth = 0.0
	Separation range, map units (maxWidth > minWidth > 0).
double	maxWidth = 0.0
double	station = 0.0
	Sampling step along each line, map units (> 0).
double	maxAngleDeg = 20.0
	Largest angle between the two lines at a station.
double	widthChange
	Largest relative change of the separation from one station to the next.
int	minStations = 4
	A pair also runs at least three separations along the line.
double	endTrimFraction = 0.25
std::function< double(double, double)>	elevationAt

Member Data Documentation

elevationAt

std::function<double(double, double)> mesh::FacingPairOptions::elevationAt

Ground elevation at a map coordinate (NaN = unknown). Null = no trough test (every facing pair qualifies).

endTrimFraction

double mesh::FacingPairOptions::endTrimFraction = 0.25

Each run gives up this fraction of its separation at both ends, so the strips of two crossing streets keep apart at the intersection.

maxAngleDeg

double mesh::FacingPairOptions::maxAngleDeg = 20.0

Largest angle between the two lines at a station.

maxWidth

double mesh::FacingPairOptions::maxWidth = 0.0

minStations

int mesh::FacingPairOptions::minStations = 4

A pair also runs at least three separations along the line.

minWidth

double mesh::FacingPairOptions::minWidth = 0.0

Separation range, map units (maxWidth > minWidth > 0).

station

double mesh::FacingPairOptions::station = 0.0

Sampling step along each line, map units (> 0).

widthChange

double mesh::FacingPairOptions::widthChange

Initial value:

=
        0.25

Largest relative change of the separation from one station to the next.

---

The documentation for this struct was generated from the following file:

• /home/runner/work/openswmm.gui/openswmm.gui/libraries/meshkit/include/mesh/breaklinestrips.h