Two open bank polylines with independently supplied directions. More...
#include <meshkit/patch.hpp>
Public Attributes | |
| Vector< Point2 > | bankA |
| First bank: open polyline in XY units with >= 2 finite points, no repeated consecutive vertex and distinct ends; either direction. | |
| Vector< Point2 > | bankB |
| Second bank, same rules. | |
| int | across = 0 |
| Quads across between the banks at every station; must be >= 1. | |
| double | along = 0.0 |
| Target station spacing, XY units, measured on the longer bank; must be finite and >= 0. | |
| Text | tag |
| Label copied to PatchMesh::tag and to every generated quad. | |
Two open bank polylines with independently supplied directions.
Endpoints are paired by minimum total connection length. Stations use the union of normalized arc-length vertices, retaining every bank bend exactly. Positive along subdivides that union to the target spacing; zero retains only the union. This is normalized arc correspondence, not surveyed stations.
| int meshkit::plan::BankPairPatch::across = 0 |
Quads across between the banks at every station; must be >= 1.
| double meshkit::plan::BankPairPatch::along = 0.0 |
Target station spacing, XY units, measured on the longer bank; must be finite and >= 0.
Each interval of the station union is cut into ceil(advance/along) parts (a ratio within a tiny tolerance of an integer is snapped to it).
First bank: open polyline in XY units with >= 2 finite points, no repeated consecutive vertex and distinct ends; either direction.
Second bank, same rules.
The banks and the two end connectors must form one simple outline; generation may reverse or swap the banks.
| Text meshkit::plan::BankPairPatch::tag |
Label copied to PatchMesh::tag and to every generated quad.