Two open bank polylines with independently supplied directions. More...
#include <mesh/meshpatch.h>
Public Attributes | |
| QVector< QPointF > | bankA |
| First bank: open polyline of >= 2 finite points with no repeated consecutive point. | |
| QVector< QPointF > | bankB |
| Second bank, same rules; must not touch or cross bankA. | |
| int | across = 0 |
| Quads between the banks at every station; must be >= 1. | |
| double | along = 0.0 |
| Target station spacing in XY units; finite >= 0 (0 = union only). | |
| QString | tag |
| Copied to the generated patch and its quads. | |
Two open bank polylines with independently supplied directions.
Endpoints are paired by minimum total connection length. Stations use the union of normalized arc-length vertices, retaining every bank bend exactly. Positive along subdivides that union to the target spacing; zero retains only the union. This is normalized arc correspondence, not surveyed stations.
| int mesh::BankPairPatch::across = 0 |
Quads between the banks at every station; must be >= 1.
| double mesh::BankPairPatch::along = 0.0 |
Target station spacing in XY units; finite >= 0 (0 = union only).
| QVector<QPointF> mesh::BankPairPatch::bankA |
First bank: open polyline of >= 2 finite points with no repeated consecutive point.
| QVector<QPointF> mesh::BankPairPatch::bankB |
Second bank, same rules; must not touch or cross bankA.
Either direction is accepted.
| QString mesh::BankPairPatch::tag |
Copied to the generated patch and its quads.