|
| | breaklinestrips.cpp |
| | Facing break-line pairs (workplans/MESH_TRIANGLE_ENGINE_PLAN_2026-09-30.md D12.3): two terrain break lines that run side by side at a steady separation, with nothing between them and lower ground between them than outside both — a street between its curbs, a ditch between its banks.
|
| |
| | cellplanner.cpp |
| |
| | constraintaudit.cpp |
| |
| | constraintpreview.cpp |
| |
| | constraintshared.cpp |
| |
| | constraintsimplifier.cpp |
| |
| | inpmeshreader.cpp |
| | Read the [2D_*] mesh sections — [2D_VERTICES], [2D_TRIANGLES], [2D_QUADS] (mixed meshes: quads appended after the triangles, cell index = n_triangles + j; a triangle row after a quad row is an error), [2D_VERTEX_NODE_MAP], [2D_TRIANGLE_NODE_MAP], the per-edge [2D_BOUNDARY_CONDITIONS] / [2D_EDGE_CONVEYANCE] pair and the GG0a per-cell [2D_INFILTRATION_OPTIONS] / [2D_INFILTRATION_DEFAULTS] / [2D_INFILTRATION] family — from a SWMM .inp, resolving the [2D_MESH_FILE] indirection when present.
|
| |
| | inpmeshwriter.cpp |
| | emit [2D_VERTICES] / [2D_TRIANGLES] / [2D_VERTEX_NODE_MAP] / [2D_TRIANGLE_NODE_MAP] (plus the GG0a [2D_INFILTRATION*] family) sections from a MeshResult + a CouplingMap, and patch them into a SWMM .inp file (replacing existing sections in place).
|
| |
| | meshbctype.cpp |
| | Slice §V.VA / §V.VC — enumeration of 2D mesh boundary-condition types surfaced by the Mesh Editing toolbar.
|
| |
| | meshcdt.cpp |
| |
| | meshcellparams.cpp |
| | Registry of the per-cell (per-triangle) 2D mesh parameters the user can prescribe interactively, plus the read/write dispatch every editing surface shares.
|
| |
| | meshcellstats.cpp |
| | MESH_DECOUPLED_1D2D_REMAP_PLAN Part A — cell-area statistics for the mesh layer's Metadata tab.
|
| |
| | meshgenerator.cpp |
| | 2D mesh generator (workplans/MESH_TRIANGLE_ENGINE_PLAN_2026-09-30.md): a constrained Delaunay triangulation of every constraint, refined to the caller's size function and a requested minimum angle (mesh/meshcdt.h), with aligned quad strips only where features ask for them — four-sided quad regions, corridors, streets between facing break lines, conduits.
|
| |
| | meshinfil.cpp |
| | Implementation of the per-cell 2D infiltration value types, resolution and token grammar declared in meshinfil.h.
|
| |
| | meshpatch.cpp |
| |
| | meshquadcleanup.cpp |
| | Topological cleanup and guarded smoothing inside quad regions (workplans/QUAD_MESHING_REDESIGN_PLAN_2026-09-06.md §4.4g–h).
|
| |
| | meshquadmatch.cpp |
| | Pairing triangles into quads inside a quad region (workplans/QUAD_MESHING_REDESIGN_PLAN_2026-09-06.md §4.4f) — no external library.
|
| |
| | meshquadregion.cpp |
| |
| | meshreorder.cpp |
| | Hilbert-curve renumbering of a freshly generated mesh.
|
| |
| | naturalnbinterpolator.cpp |
| | Natural-neighbour interpolation over a sparse set of scattered seed points (x, y, z).
|
| |
| | pslgprep.cpp |
| | PSLG preparation utilities shared by the mesh-generation pipeline and its tests: RDP simplification, ring densification, hole-ring preparation (simplify → validate → densify → interior seed, parallel across rings), and a y-banded odd-even point-in-rings index.
|
| |
| | quadblocks.cpp |
| |
| | sizefield.cpp |
| |
| | sizingaudit.cpp |
| |
| | sms2dmreader.cpp |
| | Phase G5 of workplans/TRI_QUAD_MESHING_PLAN_2026-09-06.md — a minimal reader for the SMS 2DM mesh format (Aquaveo).
|
| |